Kramer Electronics, Ltd.
Contents Contents 1 2 2.1 3 3.1 3.2 3.3 4 5 6 6.
Introduction 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups 1 that are clearly defined by function.
Getting Started 2.1 Quick Start This quick start chart summarizes the basic setup and operation steps.
Overview 3 Overview The TP-210 XGA Line Transmitter is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It takes one input and provides 10 twisted pair outputs plus two computer graphics video outputs on 15-pin HD connectors for local monitoring.
Your TP-210 XGA Line Transmitter/DA 3.2 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP) We recommend that you use Shielded Twisted Pair (STP) cable. There are different levels of STP cable available, and we advise you to use the best quality STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP is intended for analog signals where skewing is not an issue. For cases where there is skewing, our UTP skew-free cable, Kramer BC-XTP, may be used.
Your TP-210 XGA Line Transmitter/DA Figure 1: TP-210 XGA Line Transmitter/DA 5
Your TP-210 XGA Line Transmitter/DA Table 1: Front Panel TP-210 XGA Line Transmitter/DA Features # Feature POWER Switch XGA INPUT 15-pin HD Connector XGA OUT 2 15-pin HD Connector XGA OUT 1 15-pin HD Connector OUT CAT 5 Connectors Power Connector with FUSE 1 2 3 4 5 6 Function Illuminated switch for turning the unit ON or OFF Connects to the video source Connects to the video acceptor 2 Connects to the video acceptor 1 Connect to the LINE IN connectors of Line Receivers 1 (from 1 to 10) AC connector enab
Installing the TP-210 XGA Line Transmitter/DA in a Rack 5 Installing the TP-210 XGA Line Transmitter/DA in a Rack This section provides instructions for rack mounting the unit.
Connecting the TP-210 XGA Line Transmitter/DA 6 Connecting the TP-210 XGA Line Transmitter/DA To connect the TP-210, as Figure 3 illustrates, do the following: 1. Connect an XGA source (for example, a computer graphics source) to the XGA INPUT connector. 2. Connect the XGA OUT 1 XGA connector to an XGA acceptor (for example, local display 1). 3. Connect the XGA OUT 2 XGA connector to an XGA acceptor (for example, local display 2). 4.
Connecting the TP-210 XGA Line Transmitter/DA TP-210 XG A IN PU T XG AO UT 1 XG AO UT OU TP 2 UT 1 OU TP UT 2 OU TP UT 3 OU TP UT 4 OU LINE TP UT OUT PU 5 TS OU TP UT 6 OU TP Lo ng UT 7 OU TP CA T5 UT 8 OU TP ca ble TP-120 UT 9 OU TP UT 1 0 Lo ng CA T5 ca ble TP-120 VGA VGA Local Display 1 Computer Graphics Source VGA VGA Local Display 2 Display 1 VGA Display 10 Figure 3: Connecting the TP-210 XGA Line Transmitter/DA 9
Technical Specifications 6.
LIMITED WARRANTY Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product.
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing. Caution Kramer Electronics, Ltd. Web site: www.kramerelectronics.com E-mail: info@kramerel.