Manual

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VM-100C
4
Table 1: Front Panel VM-100C 1:10 Video Component Distributor Features
# Feature Function
1 POWER Switch Illuminated switch supplying power to the unit
Table 2: Rear Panel VM-100C 1:10 Video Component Distributor Features
# Feature Function
1 Input Termination Button
Pushing in selects 75Ω; releasing selects Hi-Z
1
2 Y RCA Connector
3 R-Y RCA Connector
4
LOOP
B-Y RCA Connector
For looping the inputs (if required)
5 Y RCA Connector
6 R-Y RCA Connector
7
INPUT
B-Y RCA Connector
Connects to the component source
8 Y RCA Connector
9 R-Y RCA Connector
10
OUT
B-Y RCA Connector
Connects to the component acceptors (from 1 to 10)
11 Power Connector with Fuse AC connector enabling power supply to the unit
Figure 2 and Table 3 define the YUV Level trimmers and the YUV EQ.
trimmers on the underside of the VM-100C:
Figure 2: VM-100C Underside Trimmers
Table 3: VM-100C Underside Trimmer Features
Feature Function
Y LEVEL Trimmer Adjusts
2
the Y output signal level
Y EQ. Trimmer Adjusts
2
the Y equalization level (EQ.)
U LEVEL Trimmer Adjusts
2
the U output signal level
U EQ. Trimmer Adjusts
2
the U equalization level (EQ.)
V LEVEL Trimmer Adjusts
2
the V output signal level
V EQ. Trimmer Adjusts
2
the V equalization level (EQ.)
1 For looping select Hi-Z
2 Insert a screwdriver into the small hole and carefully rotate it, trimming the OUTPUT level or EQ level