K R A ME R E LE CT R O N IC S L T D .
Contents 1 Introduction 1 2 2.1 Getting Started Achieving the Best Performance 2 2 3 3.
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis.
2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment • Review the contents of this user manual Use Kramer high performance high resolution cables 2.1 i Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).
3 Overview The Kramer VP-2L is a high performance line amplifier for computer graphics video signals (up to UXGA) and HD signals. It accepts an input on a 15-pin HD connector and provides a buffered output, also on a 15-pin HD connector.
3.1 Defining the VP-2L UXGA Line Amplifier This section defines the VP-2L. Figure 1: VP-2L UXGA Line Amplifier # Feature 1 LEVEL Control Trimmer Function Adjusts the video signal level Use a screwdriver to rotate the trimmer, adjusting the appropriate level 2 EQ. Control Trimmer 3 OUTPUT 15-pin HD Connector Adjusts the video EQ.
4 Connecting the VP-2L i Always switch off the power to each device before connecting it to your VP-2L. After connecting your VP-2L, connect its power and then switch on the power to each device. To connect your VP-2L UXGA Line Amplifier, as the example in Figure 2 illustrates, do the following: 1. Connect a computer graphics source to the INPUT 15-pin HD connector. 2. Connect the OUTPUT 15-pin HD connector to an acceptor (for example, a display). 3.
Figure 2: Connecting the VP-2L 6 VP-2L - Connecting the VP-2L
5 Technical Specifications INPUT: 1 UXGA on a 15-pin HD connector OUTPUT: 1 UXGA on a 15-pin HD connector MAX. OUTPUT LEVEL: 1.5Vpp RESOLUTION: Up to UXGA DIFF. GAIN: 2.7% DIFF. PHASE: 0.09° K-FACTOR: 0.1% S/N RATIO: 73dB CONTROLS: Level: –7.4dB to +4dB; EQ.: 0 to +26.4dB COUPLING: DC POWER SOURCE: 5V DC, 307mA DIMENSIONS: 4.27cm x 5.64cm x 2.2cm (1.68" x 2.22" x 0.87") W, D, H. WEIGHT: 0.14kg (0.31lbs) approx.
LIMITED WARRANTY We warrant this product free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Labor and parts are warranted for seven years from the date of the first customer purchase. WHO IS PROTECTED? Only the first purchase customer may enforce this warranty. WHAT IS COVERED AND WHAT IS NOT COVERED Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty: 1.
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.