Declaration of conformity

DECLARATION of CONFORMITY
We herewith confirm under our sole responsibility that the Kraus & Naimer SWITCH-DISCONNECTOR types designated as
KG10, KG10A, KG10B, KG20, KG20A, KG20B, KG32, KG32A, KG32B, KG41, KG41B, KG64, KG64B,
KG80, KG80C, KG100, KG100C, KG125, KG126, KG127, KG160, KG161, KG162,
KG210, KG211, KG212, KG250, KG251, KG252, KG315, KG316 and KG317
(all followed by letter T, all completed by letters and/or numbers indicating contact development and mechanical details)
fully comply with all applicable requirements of the following international and national standards.
Reference number Date of issue: Reference number Date of issue:
IEC 60947-1 2007-06 VDE 0660-100 2011-10
IEC 60947-1/A1 2010-12 VDE 0660-107 2012-12
IEC 60947-1/A2 2014-09 VDE 0660-200 2010-04
IEC 60947-3 2008-08 VDE 0113-1 2007-06
IEC 60947-3/A1 2012-02 VDE 0113-1/A1 2009-10
IEC 60947-5-1 2003-11
IEC 60947-5-1/A1 2009-04 UL 508 1999-01
IEC 60204-1 2005-10 UL 508 Revision 1999 1999-07
IEC 60204-1/A1 2008-11 UL 508 Revision 2000 2000-08
UL 508 Revision 2001 2001-01
EN 60947-1 2007-07 UL 508 Revision 2001 2001-12
EN 60947-1/A1 2011-01 UL 508 Revision 2002 2002-12
EN 60947-1/A2 2014-11 UL 508 Revision 2003 2003-12
EN 60947-3 2009-06 UL 508 Revision 2005 2005-07
EN 60947-3/A1 2012-04 UL 508 Revision 2008 2008-09
EN 60947-5-1 2004-06 UL 508 Revision 2010 2010-04
EN 60947-5-1/A1 2009-06 UL 508 Revision 2013 2013-03
EN 60204-1 2006-06 UL 508 Revision 2013 2013-10
EN 60204-1/A1 2009-02
CSA C22.2 No.14 2013-03
The ratings related to these standards are published in the official Kraus & Naimer BLUE LINE SWITCHGEAR Catalogues.
We also confirm that all switch-disconnectors indicated above are Listed by Underwriters Laboratories (UL) and Certified by
Canadian Standards Association (CSA) as Manual Motor Controllers additionally suitable for use as Motor Disconnecting
Means. Therefore these switchgears are delivered with UL's and CSA's approval mark shown on the rating label. In order to
ensure continuance of conformity with the requirements of UL and CSA such products are subject to Follow-Up Service
Procedures in the form of unannounced factory audits and product reviews conducted by representatives of these
organizations.
We further declare that the switch-disconnectors covered by this declaration meet all safety provisions of the EU directives
mentioned below. These directives represent legal binding laws of the European Union for electrical equipments.
To reflect compliance the switchgears are marked with the CE mark established for this purpose by the European Union.
2014/35/EU Electrical equipment designed for use within certain
voltage limits (LV Directive)
2014/30/EU Electromagnetic compatibility (EMC Directive)
2011/65/EU Restriction of the use of certain hazardous
substances in electrical and electronic equipment
(ROHS Directive)
Document no.: DOC 3301-XI / AT / 03.15 Place, date: Vienna, 12. March 2015
Issuer: Dipl.-Ing. Helmut Bosina
Engineering Team Leader, Testing Department
Legally binding signature: