Certificates

K&N Schalterentwicklungsgesellschaft m.b.H.
AUSTRIA
K & N Schalterentwicklungsges. m. b. H. P: [phone] FN 148353 t
Schumanngasse 39 E: [e-mail] UID ATU40995303
1180 Vienna www.krausnaimer.com Competent court of jurisdiction Vienna
DECLARATION of CONFORMITY
We herewith confirm under our sole responsibility that the Kraus & Naimer SWITCH types designated as
KG10, KG10A, KG10B, KG20, KG20A, KG20B, KG32, KG32A, KG32B, KG41, KG41B, KG64,
KG64B, KG80, KG80C, KG100, KG100C, KG125, KG126, KG127, KG160, KG161, KG162,
KG210, KG211, KG212, KG250, KG251, KG252, KG315, KG316 and KG317
(all followed by letter K, all completed by letters and/or numbers indicating contact arrangement and mechanical details)
fully comply with all applicable requirements of the following international and national standards.
Reference number Date of issue: Reference number Date of issue:
IEC 60947-1 2020-04 VDE 0660-100 2015-09
IEC 60947-3 2020-04 VDE 0660-107 2017-02
IEC 60947-5-1 2016-05 VDE 0660-200 2018-03
EN 60947-1 2007-07 UL 60947-1 2019-05
EN 60947-1/A1 2011-01 UL 60947-4-1 2017-10
EN 60947-1/A2 2014-11
EN 60947-3 2009-06 CSA C22.2 No.60947-1 2013-07
EN 60947-3/A1 2012-04 CSA C22.2 No.60947-4-1 2014-04
EN 60947-3/A2 2015-10
EN 60947-5-1 2017-12
The ratings related to these standards are published in the official Kraus & Naimer BLUE LINE SWITCHGEAR Catalogues.
We also confirm that all switches indicated above are Listed or Recognized by Underwriters Laboratories (UL) and Certified
by Canadian Standards Association (CSA). Therefore these switches are delivered with UL's and CSA's approval mark shown
on the rating label. In order to ensure continuance of conformity with the requirements of UL and CSA such products are
subject to Follow-Up Service Procedures in the form of unannounced factory audits and product reviews conducted by
representatives of these organizations.
We further declare that the switches covered by this declaration meet all safety provisions of the EU directives mentioned
below. These directives represent legal binding laws of the European Union for electrical equipments. To reflect compliance
the switchgears are marked with the CE mark established for this purpose by the European Union.
2014/35/EU Electrical equipment designed for use within certain
voltage limits (LV Directive)
2014/30/EU Electromagnetic compatibility (EMC Directive)
2011/65/EU Restriction of the use of certain hazardous
substances in electrical and electronic equipment
(ROHS Directive)
Document no.: DOC 1301-XK / AT / 11.20 Place, date: Vienna, 9. November 2020
Issuer: Dipl.-Ing. Helmut Bosina
Engineering Team Leader, Testing Department
Legally binding signature: