I N S TA L L AT I O N MA N UA L Single Lever Vessel Glass Waterfall Bathroom Faucet KGW-1700 www.kraususa.com I toll free: 1.800.775.0703 I © 2013-2014 Kraus USA Inc.
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help. For more information about Kraus products, please visit: www.kraususa.
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800775-0703 for a replacement • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone • Place bucket under angle stops.
Diagram and Parts List 1 2 3 4 5 8 9 6A 6B 6C 6D 7
11 12 Diagram and Parts List 1 2 3 4 5 6 7 8 1. 2. 3. 4. 5. 6. Decorative Ring Glass Disc Lever Seal for Glass Disc Faucet Body Mounting Hardware (A) Rubber Washer (B) Metal Washer (C) Mounting Nut (D) Mounting Screws 7. Hot & Cold Waterlines (2) 8. Hex Wrench 13 Tools you will need: Adjustable Wrench Phillips Screwdriver 9.
Dimensions 7 1/8" (181mm) 12.5° 12.5° (7. 22 1/16" (560mm) 2 1/8" (54mm) 2 5/16" (59mm) 1/16"~1 3/4" (1mm~44mm) " 3/8 m 6"~ .8m 5/1m~8 2m 1 1/4"-18UNEF-2A 12.
Dimensions 7 11/16" (195mm) 12.5° 2.5° 58.2° 22 1/16" (560mm) 2 5/16" (59mm) 1/8" 54mm) 3 9/16" (90mm) 6 1/8" (155mm) 9/16"-24UNEF-2B 12 11/16" (322mm) 11 1/4" (286mm) 10 7/16" (265mm) " 3/8 m 6"~ .8m 5/1m~8 2m (7. 12.
Step 1: Remove Mounting Hardware Remove mounting hardware (6A, B, C, & D) from the mounting pipe 1 6A 6B 6C 6D 5 Step 2: Remove Decorative Ring Remove decorative ring (1) from faucet body (5) 1 1 6A 6B 6C 6D 5 5 2 5
Step 3: Install Glass Disc Install glass disc (2) on faucet body (5). Secure it using decorative ring (1) 1 1 NOTE: Hand-tighten only (decorative ring) 2 5 6A 6B 6C 6D 5 Step 4: Install Faucet 5 red Line Hot blue Line Cold Insert faucet body (1) into the hole on the countertop.
Step 5: Secure Mounting Hardware Adjust direction of faucet body (5). Tighten mounting nut (6C) until snug. Tighten mounting screws (6D) to nut with a Phillips head screwdriver until snugred Line 1 2 5 Hot Step 6: Connect Waterlines to Main Valve blue Line 5 red Line Hot blue Line Cold Cold Connect hot and cold waterlines (7) to the angle stops. Tighten with a wrench until snug.
Step 7: Flush Faucet Turn water on for a minute to ensure proper water flow Open Hot Cold
Replacement Parts 1. (A) Decorative Ring (B) O-ring 2. Glass Disc 3. Lever 4. Seal for Glass Disc 5. Locking Nut 6. Cartridge 7. Flow Restrictor 8. Hot & Cold Waterlines 9. Mounting Hardware (A) Rubber Washer (B) Metal Washer (C) Mounting Nut (D) Mounting Screws 10.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under the handle Locking nut has come loose Unscrew the decorative ring (by hand) and remove the glass disc. Loosen set screw with a hex wrench located underneath lever and remove lever.
Codes/Standards Applicable: NSF/ANSI 372 LEAD FREE IA P MO ASME A112.18.1M R& T NSF/ANSI 61 2.2GPM 8.3L/min maximum TM HELP LINE Our customer service hours are Monday – Friday, 9am – 8pm EST. Be sure to visit our website at www.kraususa.com If you are a homeowner please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.
Close 25˚ 90˚ Care & Maintenance Push *To keep the product clean & shining, follow the steps below: Open 1. 2. 3. 4. Left Hot Water Rinse with clean water & dry with a soft cloth Do not clean with soaps, acid, polish, abrasives, or harsh cleaners Do not use cloth with a coarse surface Unscrew the aerator and clean when necessary *This installation manual is subject to change without further notice. Download the Kraus Care & Maintenance Guide at: http://www.kraususa.
R E G I S T E R Y O U R P R O D U C T T O D AY Receive Proof of Ownership Access Customer Care & Installation Help Get Exclusive Kraus Offers & Promotions Scan to Register Online or visit http://www.kraususa.com/registration We’re always looking for ways to improve. Please take a moment to share your experience. Visit http://www.kraususa.com/review to let us know what you think about your new Kraus product. Contact Us to Learn More 1.800.775.0703 / www.kraususa.com / customerservice@kraususa.
