Installation Guide

8
1. Mark Faucet and Drain Hole Location
· Place sink in desired location on countertop and mark drain hole and faucet
hole centerline with a pencil.
NOTE: Make sure clearance is suitable for backsplash, faucet, and sink plumbing.
NOTE: Please allow a minimum of 4.5” from wall to edge of sink for faucet placement
clearance.
NOTE: For model numbers KCV-142 and KCV-150, faucet hole location should be
measured from center of drain hole to center of faucet hole on sink.
2”
2 1/2”
2. Drill Countertop
· Cut the drain opening in the countertop by carefully placing the 4" hole saw on
the area marked by pencil.