Installation Guide

3. Install Sink

· Check the alignment of the sink to the opening in the countertop. Use a bead of

clear silicone (or preferred adhesive) around the underside of the sink.

· Carefully place the sink on the countertop, align, and press firmly

· Allow sealant to set for 30 – 60 minutes

NOTE: Please make sure Kraus logo is facing you when mounting sink

NOTE: Use acetone or rubbing alcohol to remove any excess sealant

immediately after application

4. Install Plumbing Fixtures

· Connect drain to sink. Connect trap to drain. Connect water supply

connections to faucet according to manufacturer’s instructions.

· Run water into sink and check for leaks.