R INSTALLATION MANUAL Ceramic Bathroom Vessel Sinks KCV-120 / KCV-121 / KCV-122 / KCV-125 KCV-135 / KCV-140 / KCV-141 KCV-142 / KCV-150 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
Prior to Installation: · Make sure that you have all necessary parts by checking the parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. · Inspect the sink prior to installation to make sure that it has not been cracked or chipped during shipping.
Tools you will need Safety Goggles Drill Silicone Adhesive Pencil Tape Measure 4" Hole Saw Dimensions 15 1/4" (386mm) 19 1/4" (488mm) R 1 5/8" (40mm) 14" (356mm) 15 1/4" (386mm) Ø1 3/4" 18" (458mm) (45mm) R 5/8" (40mm) Ø2 3/4" 4 3/8" (15mm) (110mm) 5 1/2" 1 5/8" (140mm) (15mm) (110mm) 4 3/8" R 5/8" 1 3/4" Ø2 3/4" (45mm) (70mm) (135mm) 14" (356mm) 14" (356mm) Ø1 3/4" (45mm) 15 1/4" (386mm) (20mm) 5 3/8" R 3/4" (70mm) KCV-120 15 1/4 " x 15 1/4 " x 5 1/2" KCV-121 19 1/4
Dimensions Ø1 3/4" 16 3/4" (427mm) 16 3/4" (427mm) 19 3/8" (493mm) (60mm) Ø1 3/4" (45mm) 11" (280mm) 11 3/4" (300mm) 15 1/4" (387mm) (45mm) R2 3/8" 10" (255mm) 18 5/8" (473mm) 15 1/4" (387mm) 11 3/8" Ø2 3/4" (290mm) (70mm) KCV-122 19 3/8" x 11 3/4" x 5 1/8" 15 3/4" (400mm) KCV-125 16 3/4" x 16 3/4" x 4 1/2" Ø1 3/4" 14 5/8" (372mm) 15 3/4" (400mm) (45mm) Ø17 3/4" (450mm) Ø1 3/4" (45mm) R3 7/8" R 30" (762mm) 3/4" (20mm) (90mm) 4 1/2" (114mm) (130mm) 5 1/8" (15mm) 3 1/2" R 5/
Dimensions Ø16" Ø18 1/4" (45mm) (463mm) Ø1 3/8" (35mm) 7 1/4" Ø1 3/4" Ø14 3/4" (375mm) (184mm) (406mm) Ø17 3/8" Ø1 3/4" (442mm) (45mm) 5/8" (25mm) (200mm) (90mm) Ø1" (15mm) 3 1/2" (32mm) 1 1/4" 5 1/2" R 7 7/8" R 5/8" (140mm) 5 3/8" Ø5 1/2" R 3/8" (135mm) (158mm) Ø3 1/8" (10mm) (140mm) (80mm) (15mm) 18 5/8" (472mm) (135mm) Ø1 3/4" (45mm) Ø1" (25mm) 3 3/4" (32mm) 1 1/4" R 5/8" (320mm) 12 5/8" 5 3/8" (35mm) 17 3/8" (442mm) 5 3/4" Ø1 3/8" (96.
1. Mark Faucet and Drain Hole Location · Place sink in desired location on countertop and mark drain hole and faucet hole centerline with a pencil. NOTE: Make sure clearance is suitable for backsplash, faucet, and sink plumbing. NOTE: Please allow a minimum of 4.5” from wall to edge of sink for faucet placement clearance. NOTE: For model numbers KCV-142 and KCV-150, faucet hole location should be measured from center of drain hole to center of faucet hole on sink. 2” 2 1/2” 2.
3. Install Sink · Check the alignment of the sink to the opening in the countertop. Use a bead of clear silicone (or preferred adhesive) around the underside of the sink. · Carefully place the sink on the countertop, align, and press firmly · Allow sealant to set for 30 – 60 minutes NOTE: Please make sure Kraus logo is facing you when mounting sink NOTE: Use acetone or rubbing alcohol to remove any excess sealant immediately after application 4. Install Plumbing Fixtures · Connect drain to sink.
Codes/Standards Applicable: UP C C R Ceramic Bathroom Sink Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Ceramic Sink” in its original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product (Ceramic Sink) to be free from defects in material and workmanship under normal usage for the lifetime of the product.
Commercial Warranty Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded. No additional warranties, express or implied are given, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
INSTALLATION GUIDE Ramus™ Single Handle Vessel Faucet KVF-1220 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list.
Diagram and Parts List A B H C D E F I G A. Faucet Body B. Aerator C. Flange D. Plastic Washer E. Metal Washer 3 F. Mounting Nut G. Screws H. Hex Wrench I.
Faucet Dimension 7 3/4" [196.4mm] 6 1/4" 8 3/4" [223.0mm] 12 7/8" [327.5mm] 2 1/2" [61.9mm] [159.4mm] Ø2 1/4" [57.
Drain Dimension 2 3/4" [69.0mm] Ø2 3/8" 5/8"~2 3/8" 6 3/4" G1 1/4-11 [172.5mm] [15.8mm~61.6mm] [61.1mm] Ø1 1/4" [31.
Step 1: Remove washers and mounting nut Shut off the water supply. Remove the old faucet. Clean the mounting surface. Remove the mounting nut & screws (F&G), metal washer (E) and plastic washer (D) from the faucet (A). A D E F&G Step 2: Installing the faucet A F Place faucet (A) through the hole in countertop. Secure the faucet (A) to the countertop using the plastic washer (D), metal washer (E) and mounting nut (F) provided. Tighten screws (G).
Step 3: Connect waterlines to main valve Attach waterlines to angle stops and tighten until snug. Turn on angles stops and check for leaks (DO NOT TURN FAUCET ON) Step 4: Install Press pop-up assembly 1 2 3 4 5 6 7 7 Unscrew the nut (6) from the pop-up body (2), move over the tail pipe (7) and washer (5), then unscrew the coupling nut (4) and remove the washer (3).
Step 4: Install Press pop-up assembly 1 2 3 Place the washer (1) underneath the flange of the pop-up body (2). Slide the pop-up body (2) down through the drain hole on the vessel or basin. From underside, slide the washer (3) against the bottom of the vessel or basin, thread on the coupling nut (4) and tighten. Do not overtighten. 4 Slide the nut (6) over the tail pipe (7). Place the washer (5) into the nut and tighten. Do not overtighten.
Replacement Parts Replacement Parts List Finish / Color 1 2 3 4 1. Cover Button 12 3. Handle SFS, MB, GM, BG* KP27157 4. Cap & O-ring SFS, MB, GM, BG* KP27160 5. Bonnet Nut KP27161 6. Cartridge KP27162 7. Aerator KP27163 8. Flange 7 8 9 10 13 11 KP27159 KP27158 2. Set Screw 5 6 GR, BL* Part # SFS, MB, GM, BG* KP27146 10. Metal Washer KP27147 11. Mounting Nut & Screw KP27148 12. Hex Wrench KP27166 14. Filter Washer SFS, MB, GM, BG* 3 KP27164 9. Plastic Washer 13.
1 Troubleshooting If you have followed the instructions carefully and your faucet still does not work properly, take the following coorective steps: PROBLEM CAUSE Leakage under the handle Bonnet nut (5) has come loose 10 Hexagon Nut 9 11 Aerator drips or has inconsistent water flow pattern 12 Water will not shut off completely ACTION Remove the cover button (1). Loosen set screw (2) with hex wrench (12). Remove the handle (3). Unscrew cap (4) (by hand only).
Codes/Standards Applicable: NSF/ANSI 372 LEAD FREE IA P MO R& T NSF/ANSI 61 ASME A112.18.1 1.2GPM 4.5L/min maximum TM Faucet Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (”Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
Shipping charges will be covered foe the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. Commercial Warranty Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
TROUBLE - SHOOTING If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps PROBLEM CAUSE ACTION Drain is leaking Washers may be compromised or installed incorrectly Check washers to make sure they are installed correctly and not cracked KRAUS LIFETIME LIMITED WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. ("Kraus").
PU-10 DIAGRAM AND PARTS LISTS STEP 1 STEP 3 REPLACEMENT PART LIST Remove connector (h), tail pipe (g), mounting nut (e), plastic washer (d) and concave washer (c) from drain body (a). Tighten mounting nut (e) with adjustable wrench until snug. Thread connector (h) with tailpipe (g) attached, onto drain body (a) and hand-tighten. 1 a 2 Installer Tip: Make sure tailpipe washer (f) is installed in tailpipe a. Drain Body b c 3 b. Thin Gasket a c. Concave Gasket d. Plastic Washer b d e 4 e.
