Installation Guide

Trouble - Shooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM CAUSE ACTION
Leakage under the
handle
Hot or cold cartridge (5
or 14) may be loose
Remove cover button
(4). Loosen set screw (3)
with hex wrench (19).
Remove handle (1 or
2). Tighten hot or cold
cartridge (5 or 14) with
adjustable wrench
Aerator drips or has
inconsistent water flow
pattern
Aerator (10) may be
dirty or not seated
properly
Unscrew aerator (10)
with aerator key (18).
Remove aerator (10)
and clean out debris
Water will not shut off
completely
Hot or cold cartridge (5
or 14) may need to be
adjusted or replaced
Remove cover button
(4). Loosen set screw
(3) with hex wrench
(19). Remove handle
(1 or 2). Remove hot or
cold cartridge (5 or 14)
with adjustable wrench.
Check for cracks
Care & Maintenance
*To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
*This installation manual is subject to change without further notice.
1
10
279
10 31/32”
Minimum distance 90mm
Less than 90mm
Cold Water
32 3/32”
Ø35~Ø38
1
2
3
10
9
11
12
13
Hexagon Nut
Hot
Water
Cold
Water
2 3
1
4
5
7
6
8
4
5
6
7
8
Ø1 3/8”~
Ø1 1/2”
815
194
7 5/8”
Ø1 3/8~Ø1 1/2”
30˚
10
11
Close
Open
Left
Hot Water
Push
25˚
90˚
12
13
8
7
Ø35~Ø38
Max35
217
8 17/32”
Max1 3/8”
9
11
12
13
2
3
4
5
6
7
8