INSTALLATION GUIDE Coda Single Lever Vessel Faucet FVS-13800 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
10 1/8” (257mm) 8 5/16” (21mm) ∅ 1 15/16” (∅ 50mm) 1 3/8” (35mm) ∅ 1 3/4” (∅ 45mm) Prior to Installation: ∅ 1 15/16” (∅ 50mm) • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-7750703 for a replacement • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
FVS-13800 Diagram and Parts List I A. Faucet Body B. Base O-Ring C. Rubber Washer H1 H2 H3 D. Metal Washer E. Mounting Nut F. Mounting Screws G. Hot & Cold Waterlines H. Aerator Assembly A H1. Aerator Washer B G H2. Aerator H3. Aerator Cover I.
Faucet Dimensions 267 10 1/2” 136 5 3/8” 235 9 1/4” 337 13 1/4” 15º Max35 Max1 3/8” ∅48 ∅1 7/8” ∅33~∅35 ∅1 5/16”~∅1 3/8” 4
Step1: Install mounting hardware and waterlines A A B B C G D E F Remove mounting nut (E) with mounting screws (F) attached. Remove metal washer (D), and rubber washer (C) from threaded mounting pipe. Place faucet body (A) on a soft cloth, spout facing up. Secure the hot & cold waterlines (G) at the base of the faucet (HAND-TIGHTEN ONLY) A. Hot Side: Left B.
Step 3: Secure faucet A A B After B adjusting direction of faucet body (A), tighten mounting nut (E) with adjustable wrench until snug. Secure mounting nut (E) by tightening mounting screws (F) C a Phillips head screwdriver with G E F D E F G Step 4: Connect waterlines to faucet and main valve Thread hot & cold waterlines (G) onto angle stops and tighten with adjustable wrench until snug.
Step 5: Flush faucet Remove aerator assembly (H). Loosen aerator cover (H3) with adjustable wrench. Remove aerator (H2) and aerator washer (H1). Turn water on for 1 minute to remove any debris. Reassemble aerator assembly (H) H1 H2 H3 Replacement Part List - FVS-13800 3 2 4 1 5 6 7 17 8 9 10 15 11 12 13 14 7 16 1. Metal Handle 2. Set Screw 3. Cover Button 4. Cartridge Cover 5. Locking Nut 6. Cartridge 7. Aerator Washer 8. Aerator 9. Aerator Cover 10. Base O-Ring 11. Rubber Washer 12.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE 10 Leakage under the 9 handle 11 Locking nut (5) has comeHexagon loose Nut 12 13 ACTION Remove cover button (3). Loosen set screw (2) with hex wrench (17). Remove metal handle (1). Unscrew cartridge cover (4) (by hand only).
Codes/Standards Applicable: NSF/ANSI 372 GREEN LEAD FREE IA P MO R& T NSF/ANSI 61 ASME A112.18.1M 1.2GPM 4.5L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.