Installation Guide

3
Prior to Installation:
· Make sure you have all necessary parts by checking the diagram and
parts list. If any part is missing or damaged, please contact Kraus
Customer Service at 800-775-0703 for a replacement.
· Read all instructions and safety warnings and ensure you have all tools,
parts, and equipment necessary for a safe installation.
· Turn off the hot and cold water supply at the angle stops and turn on
the old faucet to release any built up pressure. Remove existing faucet.
· Pre-drilled hole size requirement: 1 3/8" (min)
· Max countertop thickness: 1 3/4”
R
STOP
Adjustable Wrench
Phillips Screwdriver Silicone Sealant
Safety Goggles
Pipe Tape
Care & Maintenance
* To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
* This installation manual is subject to change without further notice.
ACID
For technical assistance or replacement parts, please contact Kraus Customer
Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [e-mail]
Tools Required