Installation Guide

ManualsBrandsKRAUS ManualsKitchenBolden Single-Handle Pull-Down Sprayer Kitchen Faucet with Dual Function Sprayhead in Stainless Steel

1

2

3

4

5

6

7

8

9

Step 7. Flushing and checking for leaks

Pull the hose assembly out of the spout and

remove the spray head by unscrewing it from

the hose in a counterclockwise direction. Be

sure to hold the end of the hose down into the

sink and turn the

faucet on to the warm

position where it

mixes hot and cold water.

Flush the water

lines for one minute. This

flushes away any

debris that could cause

damage to internal

parts. Check for leaks.

Retighten any connections if necessary, but do

not overtighten. Reinstall the spray head by

hand tightening it back onto the spray hose.

After installation is completed, turn on the hot

and cold water supplies. Check for leaks.

9