INSTALLATION MANUAL Single Handle Kitchen Faucet KPF-2252 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list.
Diagram and Parts List 1 2 8 6 7 3A 3B 3C 1. Spray Head 2. Faucet Body 3. Mounting Hardware A. Rubber & Metal Washer B. Mounting Nut C. Mounting Screws 4. Quick Connector 5. Hot & Cold Waterlines 6. Spray hose 7. Weight 8.
Faucet Dimension 10 1/4” 159mm 6 1/4” 233mm 9 1/4” 262mm 2 1/4” 8 1/8” 207mm 2 1/4” 58mm 570mm 22 1/2” Max35mm 35~38mm 1 3/8” 1 3/8” ~1 1/2” 58mm 2 x 9/16-24 UNEF Installer Tip: Shut off main water supply before installing new faucet 4
Step 1: Remove mounting hardware Remove the mounting screws (3C), mounting nut (3B), and rubber & metal washer (3A) from the mounting pipe 3A 3B 3C Step 2A: Faucet installation - with deck plate For three-hole installation: Deck plate, base plate (see below), and silicone sealant (optional) are required Note: optional deck plate DP02, not included 5
Step 2B: Faucet installation - without deck plate For single-hole installation: Deck plate, base plate, and silicone sealant are NOT required Step 3: Install faucet and mounting hardware Insert faucet body (2) into hole in countertop or deck plate assembly . Install mounting hardware (3A, B & C) from underneath the countertop NOTE: The white dot on the base of the faucet should be facing forward.
Step 4: Secure mounting hardware Adjust direction of faucet body (2) so that handle is on right side of faucet. Tighten mounting nut (3B) until snug. Tighten mounting screws (3C) to nut with Phillips screwdriver until snug 3B 3C Step 5: Attach spray hose and counterweight Connect spray hose (6) to quick connector (4) attached to supply line.
Step 6: Connect waterlines Connect waterlines (5) to angle stops. Tighten both ends of waterlines with a wrench until snug. Turn on hot and cold angle stops and check for leaks Step 7: Flush spray hose 1 Remove spray head (1) from spray hose (6). Hold tip of spray hose (6).
Step 8: Check for leaks Check for leaks at the connections.
Replacement Parts 1 2 3 10 4 5 18 Replacement Parts List Finish / Color 1. Metal Handle CH,SFS,MB KP06002 2. Set Screw 11 6 1 12 13 7 23 8 9 7 KP06055 3. Handle Button CH,SFS,MB KP06030 4. Cartridge Cover CH,SFS,MB KP06020 17 Nut Hexagon 9 5. Locking Nut KP06018 6. Cartridge KP06100 7. Spray Hose CH,SFS,MB KP06097 8. Hose guide KP06045 9. Spray Head CH,SFS,MB KP06090 10. Check Valve 5 7 11.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM 11 CAUSE ACTION Leakage under faucet handle Locking nut has come loose or cartridge needs to be reseated Remove button located at top of handle. Loosen set screw with hex wrench. Remove handle and unscrew cartridge cover by hand.
Maintenance - Cartridge Replacement Step 1: Remove button located at the base of the handle. Loosen the set screw with a hex wrench. Remove the handle and unscrew cartridge cover by handhand Step 2: Unscrew the locking nut with an adjustable wrench. Remove ceramic disc cartridge Step 3: Place the new cartridge in the handle seat.
Codes / Standards Applicable: GREEN LEAD FREE IA P NSF/ANSI Standard 61 certified by IAPMO NSF/ANSI Standard 372 certified by IAPMO MO Meets ASME A112.18.1M/A112.18.1 R& T 1.8GPM 6.6L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.
