Installation Guide

13
3
Prior to Installation:
· Make sure you have all necessary parts by checking the diagram and
parts list. If any part is missing or damaged, please contact Kraus
Customer Service at 800-775-0703 for a replacement.
· Read all instructions and safety warnings and ensure you have all tools,
parts, and equipment necessary for a safe installation.
· Turn off the hot and cold water supply at the angle stops and turn on
the old faucet to release any built up pressure. Remove existing faucet.
· Pre-drilled hole size requirement: 1 3/8" (min)
· Max countertop thickness: 2 3/8”
Care & Maintenance
* To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
* This installation manual is subject to change without further notice.
ACID
R
STOP
For technical assistance or replacement parts, please contact Kraus Customer
Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [e-mail]
Tools Required
Wrench
Phillips Screwdriver Silicone Sealant
Safety Goggles
Pipe Tape