www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
Prior to Installation: x Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. x Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone. x Place bucket under angle stops.
Diagram and Parts List A. Spray Head B. Faucet Body C. Deck & Putty Plate D. Supply Hose E. Hot & Cold Waterlines F. Spray Hose G. Weight H. Quick Connect I. Hex Wrench i1. 2.5mm i2. 4mm J.
Faucet Installation Procedure 11" 4 1/4" (279mm) (106.5mm) 9 1/8" 25° (576mm) 3 1/4" (82.5mm) 22 5/8" (233mm) 10 1/4" 8 3/4" (223mm) 7 1/8" 1/16"~1" (1~25.4mm) 2 1/2" 1" (25mm) (62mm) 1 3/8" (35mm) (663mm) 26 1/8" (260.5mm) (181mm) 3 1/8" (81mm) 65° 9/16-24UNEF-2B Installer Tip: Shut off main water supply before installing new faucet.
Step 1A: Install base without deck & putty plate J Half Moon Locking Nuts Insert base (J) into sink or countertop with "FRଭNT" facing forward. Tighten screws on base (J) with 4mm hex wrench (i2) until base is secure on sink or countertop. Installer Tip: Rotate the two half-moon shaped locking nuts inward before inserting base (J) into sink or countertop. i2 Step 1B.
Step 2. Install faucet E E E F E F D Remove Quick Connect (H) from spray hose (F). Insert spray hose (F) into small hole of base (J). Insert hot & cold waterlines(E) and supply hose (D), one by one, in large hole of base. D Step 3. Secure mounting hardware Align arrow on faucet body (B) with arrow on base (J). Attach faucet body (B) to base (J). Secure faucet body (B) by tightening the set screw with 2.5mm hex wrench (i1).
Step 4. Connect waterlines to main valve Thread hot & cold waterlines (E) onto angle stops. Tighten with adjustable wrench until snug. Turn on the angle stops and check for leaks (DO NOT TURN FAUCET ON). Installer Tip: Use two wrenches when securing waterlines to angle stops to prevent kinking.
Step 5. Connect quick connect Attach Quick Connect (H) with black end onto spray hose (F) until you hear a click. Attach the other end onto the supply hose (D) until you hear a click. Installer Tip: Remove the plastic caps from the supply hose D and spray hose F prior to attach the quick connect.
Step 6. Install weight Attach weight (G) on the designated mark on the spray hose (F).
Step 7. Flush faucet Remove spray head (A). Hold tip of spray hose. Turn faucet on for 1 minute to flush any debris. Reconnect spray head (A).
Replacement Parts Replacement Parts List 1. Spray Head 3 Part # SFS, CH* KP07003 2. Plastic Sleeve KP07006 3. Spray Hose KP07007 4. Set Screw KP07008 5. Cartridge KP07047 KP07102 6. Locking Nut 2 4 5 1 7. Cartridge Cover SFS, CH* KP07101 8. Handle Assembly SFS, CH* KP07100 KP07000 9. Quick Connect Assembly 6 10. Escutcheon 7 8 10 12 9 11 Finish/Color 13 SFS, CH* KP07011 11. Base KP07005 12. Weight KP07001 13. Hex Wrench Set KP07109 (2.
Troubleshooting If you have followed the instructions carefully and your faucet still does not work proper
Codes/Standards Applicable: NSF/ANSI 372 UP C NSF/ANSI 61-9 UP C R C ASME A112.18.1 1.8GPM 6.8L/min maximum C R FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. ("Kraus"). Kraus extends this warranty to the original purchaser for personal household use of the "Faucet" in its original location. The warranty is non-transferable.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
