Installation Guide

Step 1A: Install base without deck & putty plate
Step 1B. Install base with deck & putty plate
Insert base (J) into sink or
countertop with "FRଭNT"
facing forward. Tighten
screws on base (J) with 4mm
hex wrench (i2) until base is
secure on sink or countertop.
Place a bead of clear silicone
sealant (not included) around the
edge of the putty plate (C).
Secure deck & putty plate (C) on
sink or countertop. Insert base (J)
into hole of deck & putty plate
(C) with " FRଭNT" facing forward.
Tighten screws on base (J) with
4mm hex wrench (i2) until base is
secure on deck & putty plate (C).
Installer Tip: Rotate the two
half-moon shaped locking nuts
inward before inserting base (J)
into sink or countertop.
J
Half Moon Locking Nuts
i2
C
J
i2
Installer Tip: Rotate the two
half-moon shaped locking nuts
inward before inserting base (J)
into deck plate (C).
1
2
66