MSDS

Krud Kutter®
Metal Clean & Etch
6/08/11
North America MSDS 2/8
3 COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name CAS-No. Weight %
phosphoric acid 7664-38-2 < 40 %
Components not listed are not hazardous or are below reportable limits
4 FIRST AID MEASURES
Inhalation: If inhaled, remove to fresh air. Get medical attention if symptoms persist.
Eye Contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If
easy to do, remove contact lenses, if worn. Get medical attention.
Skin Contact:
In case of contact, immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical attention. Wash clothing before reuse.
Ingestion: If swallowed, do NOT induce vomiting unless directed to do so by medical personnel. If
vomiting occurs, keep head lower than the hips to help prevent aspiration. Never give anything by mouth
to an unconscious person. Get medical attention.
5 FIRE-FIGHTING MEASURES
Extinguishing Media: Water spray, carbon dioxide, dry chemical or alcohol foam
Unsuitable Extinguishing Media: None known
Special Fire Fighting Procedures: Wear self-contained breathing apparatus and protective clothing.
Unusual Fire & Explosion Hazards: None known
Hazardous Combustion Products:
Carbon oxides, phosphorous oxides
6 ACCIDENTAL RELEASE MEASURES
Personal Precautions: Wear appropriate personal protective equipment. See Section 8.
Spill Cleanup Methods: Small Liquid Spills: Wipe up or use a non-combustible material like
vermiculite, sand or earth to soak up the product and place into a container for later disposal.
Large Spillages: Do not touch damaged containers or spilled material unless wearing appropriate
protective clothing. Stop leak if you can do it without risk. Absorb or cover with dry earth, sand or other
non-combustible material and transfer to containers. Use water spray to reduce vapors or divert vapor
cloud drift. Isolate and stay upwind. Ventilate enclosed areas. Keep unauthorized personnel away. Prevent
entry into waterways, sewer, basements or confined areas.
7 HANDLING AND STORAGE
Handling: Avoid breathing mist or vapors. Avoid contact with eyes, skin and clothing. Use only with
adequate ventilation. Wash thoroughly after handling.