User manual

User Manual of Network Video RecorderKVR-p16Px16 & KVR-p32Px16
153
recommended to disable this function after finishing the remote downloading of record files.
Steps:
1. Enter the Network Settings interface.
Menu >Configuration> Network
2. Select the More Settings tab to enter the More Settings interface, as shown in Figure 9. 14.
3. Check the checkbox of Enable High-speed Download. And click the OK button in the pop-up message box
to confirm the settings.
Figure 9. 30 High-speed Download Settings Menu
Figure 9. 31 Message Box of High-speed Download
4. Click Apply button to save and exit the interface.
9.2.13 Virtual Host Settings
Purpose:
You can directly get access to the IP camera management interface after enabling this function.
The Virtual host function can be only configured through the web browser.
Steps:
1. Enter the Advanced settings interface, as shown in the Figure 9. 32.
Configuration > Remote Configuration > Network Settings > Advanced
Figure 9. 32 Advanced Settings Interface
2. Check the checkbox of the Enable Virtual Host.
3. Click the Save button to save the setting.
4. Enter the IP camera management interface of NVR. The Connect column appears on the right-most side of