User manual

User Manual of Network Video RecorderKVR-p16Px16 & KVR-p32Px16
31
Figure 2. 20 Protocol Setting
3. Choose the protocols you just added to validate the connection of the network camera.
2.3.3 Editing IP Cameras Connected to the PoE Interfaces
This chapter applies to the Plug and Play PoE interfaces
The PoE interfaces enables the NVR system to pass electrical power safely, along with data, on Ethernet cabling to
the connected network cameras.
The KVR-p16Px16 & KVR-p32Px16 NVRs provides 16 PoE interfaces which can connect to 16 network cameras
directly; and if you disable the PoE interface, you can also connect to the online network cameras. And the PoE
interface supports the Plug-and-Play function.
Example:
For a KVR-p16Px16 NVR, when you want to connect 2 online cameras and connect 16 network cameras via PoE
interfaces, you must disable 2 PoE interfaces in the Edit IP Camera menu.
To add Cameras for NVR supporting PoE function:
Before you start:
Connect the network cameras via the PoE interfaces.
Steps:
1. Enter the Camera Management interface.
Menu> Camera> Camera