Owner manual

180
13.2.7.1 HD-SDI In/Out and HDMI In/Out Connections
Connect an ‘HD-SDI OUT’ of HD-SDI device to ‘HD-SDI IN’ of HSC 1200 using by 75ohm coaxial cable.
Connect an ‘HDMI OUT’ of HSC 1200 to ‘HDMI IN’ of device with HDMI output using by HDMI cable.
13.2.7.2 Power Supply Connections
Plug the power supply adapter (DC 12V, 3.33A) which is included in this product to ’DC12V’ connector and plug another side
to power source and Input voltage is a free volt (100 VAC ~ 240 VAC).
13.2.8 Cable
75 ohm coaxial cable
HDMI cable
VGA cable
NOTE
The cables above are not included in the package.
13.2.9 Operation Key and Screen Display Information
First Digit No. Output resolution
1 OUT_1024x768
2 OUT_1280x720p_60Hz
3 OUT_1920x1080_30Hz
4 OUT_1920x1080_60Hz, (default)
5 OUT_1920x1080_60Hz_RB
NOTE
Operation button: When operation button is pressed, output resolution is changed. Please refer the table above to identify
signal output resolution on each button pressing.
Second Digit No. Input resolution
- No input detected
1 IN_1280x720p (max. 60 frames)
2 IN_1920x1080i(50 or 60 field)
3 IN_1920x1080p(30 frame only, doesn’t support 60 frame)
NOTE
Input resolution depends on the input signal.
NOTE
Please note that HD-SDI Loop-out of this device has the same function as HD-SDI repeater that extends the signal
transmission distance up to 150m.
13.3 HSC2110
13.3.1 Introduction
HSC 2110 is a video signal converter from SD (Analog video signal) to HD-SDI.
13.3.2 Features
Convert 1CH SD to 1CH HD-SDI
NTSC/PAL Input Signal Auto Detection
Output Signal Format 1080p 30