Owner manual

181
Vertical Frequency Auto-Track
PTZ control with Pelco C supporting PTZ camera
Free Voltage 12VDC, 1A
Compact Size & Light Weight
13.3.3 Technical Specification
Model HSC 2110
Input Signal
Analog Input 75Ω, 1Vp-p/BNC-F, 1CH
NTSC or PAL (Auto Detection)
Output Signal HD-SDI SMPTE 292M
Output Format 1080p 30
Input Return Loss (BNC) >-15dB, 270 Mb
Output Return Loss (BNC) >-15dB, 1.5 Gb
Input Impedance (BNC) 75 Ohms +/- 1%
Output Impedance (BNC) 75 Ohms +/- 1%
Power Consumption Free Voltage 12VDC, 1A
Dimension (W*H*D) 83.5mm x 31.5mm x 86.9mm
HD-SDI Connector BNC Female
13.3.4 Unpacking
This equipment is an electronic appliance, so it should be handled with special care.
13.3.5 Service
If there is any problem in the product, please contact a supplier or a distributor.
13.3.6 System Dimension Diagram
13.3.7 Connector Wiring
13.3.7.1 1 In / 1 Out Analog to HD-SDI Connection
Connect a ‘VIDEO OUT’ of analog device to ‘VIDEO IN’ of HSC 2110 using 75ohm coaxial cable.
Connect an ‘HD-SDI OUT’ of HSC 2110 to ‘HD-SDI IN’ of the HD-SDI DVR using 75ohm coaxial cable.