Owner manual

182
13.3.7.2 RS-485 Connection
Connect ‘Rx +/-’ of the HD-SDI DVR or Keyboard Controller to ‘Tx +/-’ of HSC 2110.
Connect ‘VIDEO IN’ of HSC 2110 to ‘VIDEO OUT’ of analog PTZ camera using 75ohm coaxial cable.
NOTE
This function is ONLY supported with PTZ camera which supports RS-485 over coax.
NOTE
Please refer to Product Manual 4.4.2 Camera / PTZ for more information.
NOTE
Only support Camera ID 1 in Camera / PTZ Menu.
13.3.7.3 Power Supply Connection
Plug the power supply adapter (DC 12V, 3.33A) which is included in this product to ’DC12V’ connector and plug another side
to power source and Input voltage is a free volt (100 VAC ~ 240 VAC).
13.3.8 PTZ Control
A user can control PTZ camera via DVR when connection between DVR, HSC2110 and Camera are properly done.
For detailed information on Camera setup, please refer to 4.3.5 Camera.
NOTE
This function is ONLY supported with PTZ camera which supports RS-485 over coax.
13.3.9 Cable
75 ohm coaxial cable
RS-485 connection cable.
NOTE
The cable above is not included in the package.
13.3.10 Display
13.3.10.1 LEDs
KEYS Operating mode
Power LED
(Red)
• Light off: Converter off
• Light on: Converter on
Connection LED
(Green)
• Light off: Not connected
• Light on: Connected