Owner manual

186
13.5.7.2 Power Supply Connections
 Plug the power supply adapter (DC 12V, 3.33A) which is included in this product to ’DC12V’ connector and plug another side
to power source and Input voltage is a free volt (100 VAC ~ 240 VAC).
13.5.8 Cable
 75 ohm coaxial cable
NOTE
The cable above is not included in the package.
13.5.9 Display
13.5.9.1 LEDs
KEYS Operating mode
Power LED
(Red)
• Light off: Repeater off
• Light on: Repeater on
Connection LED
(Green)
• Light off: Not connected
• Light on: Connected
13.6 HSR1440
13.6.1 Introduction
 HSR 1440 is an HD-SDI repeater to extend the signal transmission distance between HD-SDI devices. The transmission
distance is easily extended up to 150m and if it requires extending longer than 150m, it may connect another repeater to
extend the signal transmission and it will be extended up to another 150m.
13.6.2 Features
 4 In / 4 Out HD-SDI Repeater
 HD-SDI SMPTE 292M Support(1080p,1080i or 720p)
 Vertical Frequency Auto-Track(60,60/1.001)
 Low power Consumption: Free voltage 12VDC, 1A
 Compact Size & Light weight
 Input / Output return loss : >-15dB at 1.5GBPS
 Input / Output Impedance: 75Ohms+/-1%
13.6.3 Technical Specification
Model HSR1440
Input / Output Signal 10bit HD Serial Digital Signal, SMPTE 292M, 1/4ch
Video Format
1080p 24/25/30
1080i 50/60
720p 24/25/30/50/60
Input Return Loss(BNC) >-15 dB 270Mb-3Gb
Output Return Loss(BNC) >-15 dB 270Mb-3Gb
Input Impedance(BNC) 75 Ohms+/-1%
Output Impedance(BNC) 75 Ohms+/-1%
Power Consumption Free Voltage 12VDC, 1A
Dimension (W*H*D) 83.75mm x 31.75mm x 87.07mm / 3.35inch x 1.27 inch x 3.48 inch
HD-SDI Connector BNC Female