Owner manual
41
Firmware
Users may upgrade DVR when it is required.
Please follow the Upgrade process below.
① Plug USB memory stick which has a proper firmware file.
② Click ( ) Then, software version stored in the USB will display on the left-hand side.
③ Click ( ) to start the upgrade.
④ Popup message box will display and ask to proceed. Click ’OK’ to proceed.
⑤ When the upgrade is completed, a message box will display. Please Click ‘OK’ button and DVR will auto-reboot.
NOTE
Upgrade file must be placed inside USB without folder. Otherwise SYSTEM will not be able to recognize the file.
CAUTION
DO NOT UPGRADE UNTIL A HARD DISK DRIVE IS INSTALLED. MAKE SURE TO UPGRADE WHEN HDD IS IN PROPER OPERATION.
CAUTION
PLUGGING OUT USB DEVICE OR FORCED POWER-OFF DURING VERSION UPGRADE MAY CAUSE PERMANENT DAMAGE.
Group
Please Click ( ) and the following screen will display.
Click ( ) on the right-hand side of Group Name box or Group Name box. Then, the virtual keyboard will display.
Please Click ( ) desired characters (up to 60 letters) on the virtual keyboard.
Select access rights for the Group by checking some of the following items (All, Setup, Archiving, Shutdown, Search,
Network, and Reboot). If Click ( ) ‘All’, all items are checked/unchecked at once.
Please choose ‘OK’ to confirm the settings, choose ‘Cancel’ to cancel.
To Edit the Group, Select a Group from the list and Click ( )
To Delete the Group, Select a Group from the list and Click ( )
USER
Please Click ( ) and the following screen will display.
Click ( ) Drop-down list of Group Name to select a group
Click ( ) on the right-hand side of User ID frame or User ID box then virtual keyboard will display.
Please Click ( ) desired characteristics (up to 60 letters) on the virtual keyboard.
Input Password, Confirm and E-mail.
Please choose ‘OK’ to confirm the settings, choose ‘Cancel’ to cancel.
Account