Owner manual
46
To adjust the location of the cameras for each sequence, Click ( ) each Drop-down list and able to select the channel.
To adjust the rotation interval of cameras, Click ( ) each Drop-down list and select from 3, 5, 10, 15, 30 and 60 seconds.
If Click ( ) at the top Drop-down list in X1 Seq, Users can adjust all items of interval at once.
To activate Sequence mode during live monitoring, click to select the multi-channel split display mode on Display Menu
Bar on the left margin of the main monitor.
NOTE
X8, X9, X10 Seq use only with 8/16 channel DVRs and x10 seq use only with 16 channel DVRs
Spot or Multi Spot is only available in S, A, B, C, D, G (4CH) and J Type.
This connection supports multi-channel display (1/4/8/9/10/16) on spot monitor depending on its channels (4/8/16).
Please Click ( ) DEVICE>Display>Spot Monitor and the following screen will display.
To Select the type of spot out, Click ( ) combo box (Users can select Multi spot or Spot).
The Sequence menu allows a user to adjust channel sequencing interval of Spot Monitor.
- X1 Seq: Adjust interval for ‘Full screen sequencing’.
- X4 Seq: Adjust interval for ‘4 split screen sequencing’.
- X8 Seq: Adjust interval for ‘Quad screen sequencing’.
- X9 Seq: Adjust interval for ‘9 split screen sequencing’.
- X10 Seq: Adjust interval for ’10 split screen sequencing’.
Check check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
To adjust the location of the cameras during the sequence, Click ( ) each Drop-down list and able to select the channel.
To adjust the rotation interval of cameras, Click ( ) each Drop-down list (Users can select 3, 5, 10, 15, 30 and 60 seconds).
If Click ( ) at the top Drop-down list in X1 Seq, Users can adjust all items of interval at once.
NOTE
X8, X9, X10 seq use only with 8/16 channel DVRs and x10 seq use only with 16 channel DVRs
Spot Monitor