Owner manual

47
4.3.2 Network
 Please Click ( ) DEVICES>Network and the following screen will show.
LAN
 Please Click ( ) Network Type. When you click the Drop-down list, users can select to Static (fixed IP) or DHCP (floating IP).
 In Static, a user must manually set the static IP address for use.
- Set IP Address, Subnet Mask, Gateway DNS Server 1 & 2. Please ask your network administrator for more details.
- To input address, please Click ( ) Numpad icon on the right-hand side of each box.
 In DHCP, IP Address, Subnet Mask, Gateway and DNS Server will be assigned automatically from a Router.
 Register UPnP: Click ( ) ‘On’ for automatic port forwarding and Click ( ) ‘Off’ on radio box to do manual port forwarding.
 Bandwidth is to setup an average transfer speed.
 There are total of 14 different networks Bandwidth users may choose. (bps: bit per second) 26 kbps, 128 kbps, 256 kbps, 512
kbps, 1 Mbps, 2 Mbps, 4 Mbps, 8 Mbps, 10 Mbps, 20 Mbps, 40 Mbps, 80 Mbps, 100 Mbps and unlimited(default).
- Ethernet support Max. 1000Mbps.
CAUTION
THE CONNECTED LOCAL ROUTER SHOUL SUPPORT AND ACTIVATE UPnP FEATURE ACCORDINGLY.
SMTP
 If users want to use “dvrdomain.com” which is offered by manufacturer instead of own SMTP server, please click on the check
box (dvrdomain.com).
 To use own SMTP, Click ( ) the check box on the left-hand side of Own SMTP box
 Click ( ) the keyboard icon on the right-hand side of SMTP Server box and the virtual keyboard will display. Please register
the SMTP Server. SMTP server can be set up by the users to have own SMTP server on their site.
 Click ( ) the keyboard icon on the right-hand side of Sender ID box, Password and Email Sender then the virtual keyboard will
display. Please register an ID to the sender mail server (e.g., ryu99).
 Default number of SMPT port is 25. Please note that any Internet Service Provider may have restrictions on the default port. If
so, port number 2525 and 587 can be used alternatively.
CAUTION
DUE TO THE VARIOUS LOCAL JUNK MAIL POLICIES, EMAILING MAY NOT WORK PROPERLY. SSL EMAIL SERVERS MAY ALSO
NOT WORK CORRECTLY. IF SO PLEASE DEACTIVATE THE SSL FEATURE IN THE (YOUR) SERVER SETUP. NOTE THAT SOME
SERVER CANNOT DEACTIVATE THIS FEATURE
Port
 The Port Number Setup menu allows a user to configure Command, Stream and web port, when connecting to network users.
 Port number
- Command: 5000~65535 (Default: 5920)
- Stream: 5000~65535 (Default: 5921)
- Web: 1~65535 (Default: 80)
LAN