Owner manual

② Click ( ) on date needed to be registered as holiday.

③ Click ( ) ADD button and Virtual keyboard will display to input description of holiday

④ Please choose ‘OK’ to confirm the input and the date will be copied to the Holidays table.

⑤ If wish to delete the registration of a certain holiday, please Click  button next to the Holiday table.

 Since holidays may vary every year, we recommend user to update on a regular basis.

4.4.3 Motion

 Please Click ( ) RECORD>Motion and the following screen will display.

 Click ( ) Drop-down list of Camera box to select Camera.

 Please set the motion detection area as follows:

① Select Sensitivity in Sensitivity box (Lowest, Low, Medium, High and Highest)

② Click ( ) to Deselect the area first.

③ Click ( ) ‘Select’ and will be able to select the area of detection on the grid.

④ Click blocks to activate.

⑤ Click ( ) Save button to save setting

 Drag and Drop Mouse Cursor on Blocks and rows/columns to select/unselect the areas.

 Repeat the procedure for Camera No. 2 to 16. If a user wants every camera to have the same mode, please Click ( ) “Save to

all CH” button.

 Click ( ) White or Black to change color of line on the grid.

4.5 RELAY

 Please Click ( ) RELAY and the following screen will display.

 The Relay menu allows a user to setup action plans when events (Alarm In, Motion, Emergency, Text-In, and Video Loss)

happen. A user may activate Alarm Out, PTZ Preset, Email Notification, Beeping, OSD popup and Message by those.