Owner manual
61
4.5.1 ALARM IN
Select Alarm out, Preset and Notification to use when Alarm In sensor goes off.
Link Notification displays E-mail addresses registered in System>General>Account>User>Email
Please follow the setup procedures below.
① Click ( ) Drop-down list of Alarm In box and select Alarm In.
② Select Alarm out to be worked when selected Alarm In is on. Please check a check box of use column on Alarm Out
box. More than one alarm outputs can be set. If Click ( ) ‘All’ of use box, all items are checked/unchecked at once.
③ Select cameras for preset when Alarm In is on. Please check a check box of use column on Preset box. More than
two cameras can be set. If Click ( ) ‘All’ of use box, all items are checked/unchecked at once
④ Click ( ) Drop-down list of Preset to change Cameras preset. If Click ( ) Drop-down list of all preset box, all items are
changed at once
⑤ Select group for notification when Alarm In is on. Please check a check box of E-Mail box. More than two Groups can
be set.
⑥ Click ( ) Drop-down list of E-mail Attachment box to attach None, JPGE or EXE
⑦ Click ( ) Drop-down list of Duration column to set the duration of recorded data for attached EXE
⑧ Select Local Actions
-Beep: When Alarm In is on, it will give the alarm sound
-Popup: When Alarm In is on, it will make the popup screen on the main monitor
-Message: When Alarm In is on, the alarm message will pop up on the OSD
⑨ Repeat the above procedure for Alarm In 2~ Alarm In 16 (Up to 2 for A and E(4CH) Type / Up to 4 for B and E(8, 16CH)
Type / Up to 8 for I Type / Up to 16 for C, D, F, G, H and J Type).
Click ( ) Copy to All CH button to copy Notification & Local Actions to all channels.
To select cameras for recording when alarm In is on, Please change setting in Record>Recording>Alarm>Record camera
4.5.2 MOTION
Please Click ( ) RELAY>MOTION and the following screen will display.
Select Alarm out, Preset and Notification to use when a motion is detected on cameras.
Link Notification displays E-mail addresses registered in System>General>Account>User>Email
Please follow the setup procedures below.
① Click ( ) Drop-down list of camera box and select Camera.
② Select alarm outputs to be worked when Motion of selected Camera is detected. Please check a check box of use
column on Alarm Out frame. More than two alarm outputs can be set. If Click ( ) ‘All’ of use box, all items are
checked/unchecked at once
③ Please check a check box of use box on Preset frame. More than two cameras can be set. If Click ( ) ‘All’ of use box,
all items are checked/unchecked at once
④ Click ( ) Drop-down list of Preset to change Cameras preset. If Click ( ) Drop-down list of all preset box, all items are
changed at once
⑤ Select group for notification when Cam 1 is detected Motion. Please check a check box of E-Mail box. More than two
Groups can be set.
⑥ Click ( ) Drop-down list of E-mail Attachment box to attach None, JPEG or EXE