user manual

9
Installing Mini-GBIC Transceiver
A typical mini-GBIC SFP transceiver is shown as follows:
To install a fiber transceiver into the SFP slot, the steps are:
1. Insert the fiber transceiver into the mini-GBIC SFP port.
Normally, a bail is provided for every SFP transceiver. Hold the
bail and make insertion.
2. Until the fiber transceiver is seated securely in the slot, place
the bail in lock position.
The mini-GBIC SFP slot supports hot-plug installation even when
the computer is powered and operating.