Installation Guide

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
20190102
Remove the fixture from its original packaging. Remove
the mounting plate (1c) from the canopy (2a) by rotating
the canopy counter clockwise. Attach the mounting plate
(1c) to the electrical junction box (1a) using the two
screws (1d) provided in the hardware package.Select
the desired length you would like the fixture to hang down
from the ceiling (120” maximum). To set the fixture hanging
height, simply push in the cord grip (2b) at the canopy.
Connect all wiring with the provided marrettes (1b) (white
to white “N”, black to black “L”, ground to ground “G”).
Attach the canopy (2a) to the mounting plate (1c) by
rotating it clockwise.
You have now completed the installation of your fixture,
enjoy.
INSTALLATION SHEET
PD22332
LED Pendant
START FROM HERE
• Make sure power is completely off at the fuse box.
• Have your fixture installed by a qualified licensed electrician
•
Prepare everything in a clear area.
• Wear gloves at all times during this installation.
• Read instructions carefully before you start assembly.
• Keep this instruction sheet for future reference.
Technical Support: 1-855-855-8926
Please Note:
• For dimming, a TRIAC or an ELV type of dimmer is required.
1.
2.
3.
19054 28th Avenue Surrey, BC Canada V3Z 6M3
1a.
1b.
1c.
1d.
2a.
2b.