Manual

THROUGHT OUT
SUB OUT
SUB OUT
THROUGHT OUT
MAIN
INPUT
MAIN
INPUT
SUB LEVEL
FULL RANGE
MONO
OFF
ON
OFF
ON
AC IN A AC IN B
WWW.KV2AUDIO.COM
DESIGNED BY KV2 AUDIO
MANUFACTURED IN THE EUROPEAN UNION
SERIAL NUMBER
WARNI NG:
TO ENSURE PROPER OPERATION ALLOW A MINIMUM OF 6 INS.
OF CLEARANCE FROM THIS SURFACE AND ADEQUATE VENTILATION.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THIS
PANEL OR ANY ATTACHED COMPONENT. NO OPERATOR SERVICED ABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. TO REDUCE
THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
ESR2800
AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
WARNING: RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION
HIGH VOLTAGE: DO NOT REMOVE THIS PANEL
WARNING
AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
WARNING: RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION
HIGH VOLTAGE: DO NOT REMOVE THIS PANEL
WARNING
Main Signal
Input A
Main Signal
Input B
FULL RANGE
OFF
ON
AC IN AAC IN B
SERIAL NUMBER
WWW.KV2AUDIO.COM
DESIGNED BY KV2 AUDIO
MANUFACTURED IN THE EUROPEAN UNION
BRIDGE - INPUT A
INPUT A
1600W / 4
BRIDGE
OUTPUT A
INPUT B
OFF
ON
3200W / 8
1600W / 4
OUTPUT B
Using the system
External subwoofer setup
Set ESR2800 Amplier to FULL RANGE OFF mode. Signal is crossed over at Hi/Mid for ESR212 cabinets
and SUB for external subwoofer.
SUB SET UP LEVEL setting depends on which subwoofer unit is used.
Mid/Hi
Output A
Mid/Hi
Output B
Sub
Output A
Sub
Output B
ESR2800
Using the system
10
ESR212 SPEAKER B
VHD4.18 VHD4.18
ESR212
SPEAKER A
VHD4.18 VHD4.18