SatelliteTelevision owner's manual TracVision G4

Installation

54-0147

Installing Your Selected Satellites

To install your selected satellites as Satellite A and B, follow the

steps below.

1. Apply power to the ADCU.

2. Following the startup sequence, press the center

button until the “Control Antenna?” screen

appears.

3. Press the

ENTER button to access the Control

Antenna Mode.

4. Press the center button until the “Install Satellite?”

screen appears.

5. Follow the process shown in Figure 2-35 on the

following page to install your selected satellites. At

the end of the process, be sure to press the YES

button to restart the antenna.

Control antenna?

Enter Next Return

Install satellite?

Yes Next Return

Section 3, “Using the ADCU

Interface” on page 59

provides

complete details on the use of the

ADCU menus, including complete

antenna control details in

Section 3.8, “Control Antenna

Mode” on page 81.

Figure 2-33

Control Antenna Screen

Figure 2-34

Install Satellite Screen