SatelliteTelevision owner's manual TracVision G4

3.4 Set Data Outputs Mode

The Set Data Outputs function is used to select several types of

data formats available from the GyroTrac. The message formats

are as follows:

• 1 sine/cosine (either 4-wire or B&G 3-wire)

• 3 serial message formats:

- NMEA 0183

- KVH pitch, roll, and yaw

- Cetrek

• 1 Furuno AD10S

These messages are output to displays and external navigation

systems only if selected via the ADCU. Selection procedures are

presented in the following sections.

54-0147

TracVision G4 Technical Manual

Set sine-cos levels?

Yes Next Return

Set serial outputs?

Yes Next Return

Setup data outputs?

Enter Next Return

Set Furuno outputs?

Yes Next Return

ALERT SCREENS

Figure 3-10

Data Outputs Mode

Menu Sequence

For more details about the available

data outputs, refer to

Appendix G,

“GyroTrac Data Outputs” on

page 145.