SatelliteTelevision owner's manual TracVision G4

Setting the Furuno Output

This option selects two available options for the Furuno

output: magnetic or true heading reference and 25 millisecond

or 200 millisecond data output rate.

54-0147

TracVision G4 Technical Manual

Return to "Setting the

Sine/Cosine Data Output"

Set Furuno Outputs?

Yes Next Return

Furuno data is: MAG

MAG ENTER True

Set data rate: 200 mS

25mS ENTER 200mS

Data rate setting will blink "25ms"

or "200ms" based on current

selection. Pushing the 25ms or

200ms buttons will toggle

between selections.

Setting will blink "Mag" or

"True" based on the

current selection. Pushing

the MAG or TRUE buttons

will toggle between

selections.

Figure 3-14

Setting Furuno Output

If the system is NOT connected to

a GPS or a ship’s gyro, only

magnetic heading data will be

available and the following variation

on the magnetic/true selection

screen will be displayed:

The system will then proceed to the

“Set Data Rate” screen.

Only Mag available