Operation Manual

2-10
2
Basic Operations
• The image erasing procedure is the same for still images and movies.
To save images to a computer, use the exclusive USB cable supplied with the camera. See
p.2-11 for details. To erase all the images on a memory card, you can select either ERASE
ALL or FORMAT. For more information, see p.5-10 for ERASE ALL and p.6-5 for FORMAT.
6 Press the OK button
E
to erase the
image.
The saved image that follows the erased image
appears on the LCD monitor.
To erase another image, repeat the procedure
from step 5.
If there are no further images, the “NO IMAGE”
message appears.
7 Press the MENU button
K
to finish
the erase procedure.
When the Memory Card is Full...
When you cannot record any more images on a memory card, the
“MEMORY CARD FULL” message appears on the LCD monitor.
When this happens, insert a new card or save the images on the
card to your computer and then erase the images on the card.
Finecam_E.book Page 10 Thursday, August 28, 2003 6:21 PM