Operation Manual

2-13

Basic Operations

• If you are using Windows 98 or Windows 98SE, install the USB drivers before connecting

the USB cable. (



p.2-12)

• If you are using Windows Me, Windows 2000 or Windows XP, no driver installation is

needed. Connect the USB cable without installing the drivers.

• To view images on your PC, you must have image-viewing software already installed. (To

play movies, QuickTime 4.1 or later must be installed.)

• You cannot check images on your PC unless there is a memory card in the camera.

Viewing images on a Windows PC

1 Load the memory card into the

camera. ( p.1-3)

2 Connect the AC adapter to the

camera.

3 Connect the camera to your PC

using the dedicated USB cable and

then start up the PC.

• Check the size of the USB connectors. The small

connector plugs into the camera and the large

connector plugs into the USB port on your PC.

Finecam_E.book Page 13 Thursday, August 28, 2003 6:21 PM