Instruction Manual Digital Camera Finecam SL400R

6-3
6
G Using the SET UP Mode Functions
You can adjust the LCD monitor brightness through 5 levels. Set the brightness to your
preferred level.
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2
Press
U
or
D
on the 4-way button to select
[FORMAT] and then press
R
.
3
Press
U
on the 4-way button to select
[EXECUTE] and then press the OK button
E
.
Card initialization begins.
4
When initialization is completed, the screen in step 2
reappears.
[BRIGHT CNTRL]
Adjusting the LCD Monitor Brightness
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2
Press
U
or
D
on the 4-way button to select
[BRIGHT CNTRL] and then press
R
.
3
Press
U
or
D
on the 4-way button to select
the desired setting and then press the OK
button
E
.
+2: Sets the maximum brightness.
+1: Sets the brightness slightly higher than normal.
STANDARD: Normal level of brightness. (default)
–1: Sets the brightness slightly lower than normal.
–2: Sets the minimum brightness.
4
The selected brightness is set and the screen in step 2
reappears.