Instruction Manual Digital Camera Finecam SL400R

6-7
6
G Using the SET UP Mode Functions
Mode Lock is a function which ensures that the settings you have specified in “
C
”, “
N
”,
“
M
” and “
G
” modes are retained when the camera is switched off. ( p.7-4)
Use this procedure to adjust the volume of the operation beep emitted when a camera
button is pressed or activation beep emitted when the camera is switched on.
[MODE LOCK]
Preserving Your Function Settings
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2
Press
U
or
D
on the 4-way button to select
[MODE LOCK] and then press
R
.
3
Press
U
or
D
on the 4-way button to select
[OFF] or [ON] and then press the OK button
E
.
OFF: Settings revert to their default values when the
camera is switched off. (default)
ON: Settings remain valid when the camera is switched
off.
4
The selected settings are applied and the screen in step 2
reappears.
[BEEP]
Adjusting the Volume of the Camera Button Beep
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2
Press
U
or
D
on the 4-way button to select
[BEEP] and then press
R
.