Instruction Manual Digital Camera Finecam SL400R

6-10
6
G Using the SET UP Mode Functions
● If a user-defined screen was selected in step 3
• Because the selected image is stored in the camera’s memory, switching memory cards or
erasing the image from the memory card does not affect the image set in the startup screen.
• You can clear the current settings in the user settings screen by selecting Reset in step 5.
Use this procedure to have the camera display images for several seconds immediately
after you shoot them.
4
Press
D
on the 4-way button to switch to the image selection
screen.
The still images recorded on the memory card appear.
5
Press
L
or
R
on the 4-way button to select
the desired image and then press the OK
button
E
.
6
Use
U
on the 4-way button to select [SET]
and then press the OK button
E
.
7
The screen for step 2 reappears.
[REC REVIEW]
Checking Images Right After You Shoot Them
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2
Press
U
or
D
on the 4-way button to select
[REC REVIEW] and then press
R
.