Instruction Manual Digital Camera Finecam SL400R

2-13

Basic Operations

• If you are using Windows 98 or Windows 98SE, install the USB drivers before connecting

the USB cable. ( p.2-12)

• If you are using Windows Me, Windows 2000 or Windows XP, no driver installation is

needed. Connect the USB cable without installing the drivers.

• To view images on your PC, you must have image-viewing software already installed. (To

play movies, QuickTime 4.1 or later must be installed.)

• To view movies that have a large number of pixels or a high frame rate, first copy the

movie to your PC and then play the copy of the movie. If you use your PC to play back a

movie that is stored on a memory card loaded in the camera, the data transfer rate may be

too slow for the movie to play smoothly.

• You cannot check images on your PC unless there is a memory card in the camera.

Viewing images on a Windows PC

Load the memory card into the

camera. ( p.1-3)

Connect the AC adapter to the

camera.

Connect the camera to your PC

using the dedicated USB cable and

then start up the PC.

• Check the size of the USB connectors. The small

connector plugs into the camera and the large

connector plugs into the USB port on your PC.