Instruction Manual Digital Camera Finecam SL400R

2-20

Basic Operations

• You do not need to install the USB drivers on a Macintosh computer. Connect the USB

cable without installing any drivers.

• To view images on your Macintosh, you must have image-viewing software already

installed. (To play movies, QuickTime 4.1 or later must be installed.)

• To view movies that have a large number of pixels or a high frame rate, first copy the

movie to your PC and then play the copy of the movie. If you use your PC to play back a

movie that is stored on a memory card loaded in the camera, the data transfer rate may be

too slow for the movie to play smoothly.

• You cannot check images on your Macintosh unless there is a memory card in the camera.

Connecting to a Macintosh

Viewing images on a Macintosh computer

Load the memory card into the

camera. ( p.1-3)

Connect the AC adapter to the

camera.

Connect the camera to your

Macintosh using the dedicated USB

cable and then start up the

Macintosh.

• Check the size of the USB connectors. The small

connector plugs into the camera and the large

connector plugs into the USB port on your

Macintosh.