Instruction Manual Digital Camera Finecam SL400R

4-5
4
Using C Camera Mode, N Continuous Shooting Mode and M Movie Mode
• This mode is cancelled after you take the picture. To continue using the self-timer, select
self-timer mode again.
• Place the camera on a stable surface.
• To interrupt the self-timer once it has started running, press the shutter release button.
• If you use the self-timer with continuous shooting, 3 pictures are taken at one-second intervals
after the specified time has elapsed.
Applicable mode: C/N/M
The number of pixels refers to the number of individual dots used to make up the image.
The larger this number, the better the image quality. However, this also increases the size
of the image file so that fewer pictures can be taken. Choose the number of pixels that best
suit the intended use of the shot. ( p.4-7)
3
Use
L
or
R
on the 4-way button to select
SELF TIMER [t] and then press the OK
button
E
.
4
Press
U
or
D
on the 4-way button to select
the desired delay time and then press the OK
button
E
.
[ ]: Sets a self-timer delay of 10 seconds.
[ ]: Sets a self-timer delay of 2 seconds.
OFF: Normal photography (default)
5
The [ ] or [ ] icon appears on the LCD
monitor to show the selected delay.
• Press the MENU button K to clear the menu icons and make picture
taking easier.
6
Press the shutter release button.
The self-timer runs for the selected delay time and then releases the shutter.
[]
Selecting the Number of Pixels (Image Size)
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
C
”, “
N
” or “
M
” icon lights on the mode
select LED.