Instruction Manual Digital Camera Finecam SL400R

4-17
4
Using C Camera Mode, N Continuous Shooting Mode and M Movie Mode
• Because this setting is retained even when the camera is switched off, you need to restore
the original setting or otherwise modify the setting to suit the scene or subject being shot.
• Specify this setting for “
C
” camera mode, “
N
” Continuous Shooting mode and “
M
”
Movie mode. This setting is used for both “
C
” mode and “
N
” mode.
Applicable mode: C/N
The available AE mode settings are [PROGRAM], in which the camera automatically sets
aperture and shutter speed, and [F2.8] or [F7.5], in which the aperture is fixed and the
camera sets the optimum shutter speed. The higher the aperture, the greater the area
centered on the subject that is sharply focused (depth of field).
• If the subject is too bright and is overexposed when F2.8 is set, the camera automatically
shifts to the F7.5 setting.
• AE mode cannot be set in the “ ”, “ ”, “ ”, or “ ” scene mode.
7
[ ] appears on the LCD monitor.
[AE MODE]
Selecting the Exposure Setting Method
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
C
” or “
N
” icon lights on the mode select
LED.
2
Press the MENU button K to display the menu icons.
3
Use
L
or
R
on the 4-way button to select
SETTINGS [ ] and then press the OK
button
E
.
4
Press
U
or
D
on the 4-way button to select
[AE MODE] and then press
R
.