Manual

REGULATOR
NIPPLE
REGULATOR VENT
GAS HOSE
ADAPTER
SEDIMENT TRAP
TO CONTROL
VALVE INLET
GA
NIPPLE
VALVE, MANUAL
SHUT-OFF
11
1. Always use approved pipe thread compound suitable
for use with L.P. gas or natural gas on the threaded
connections.
2. Assemble the components together according to the
figure. This view is to show general assembly of the
components only. The regulator must always be
mounted so its vent, regardless of location on the
regulator, is always pointed downward.
3. Tighten all connections securely.
4. Check all connections for gas leaks using approved
gas leak detectors.
FIG. 6
AIR DIVERTER
INSTALLATION INSTRUCTIONS
(Accessory)