Owner manual

MS424 12
The channel Input stage is connected directly to it's associated output stage.
This provides 1 input to 4 output splitting and is the Factory default setting.
MASTER
The channel Input and output stage are connected to the internal bus. The
Input signal is thus distributed to other output stages which have been
configured as slaves.
SLAVE
The channel Input is disabled and it's output connected to the internal bus. The
output stage now outputs signal from the internal bus.
+48V
Mic
Pad
Channel
jumpers
Input stage Output stage
+48V
Mic
Pad
Channel
jumpers
+48V
Mic
Pad
Channel
jumpers
+48V
Mic
Pad
Channel
jumpers
Bus
8/12
Bus
12/16
1
2
3
4
Internal buss