Owner manual

MS424 15
7.0 APPLICATIONS
The MS424 is primarily designed to be used in theatres, fixed installations or
touring companies who require split feeds of the same signal. The active
design of the MS424 ensures that there is not loading or signal loss and as
each output is independent a fault on one will not affect the others.
The Inputs and Outputs 1 & 2 have been sited on the rear panel so that for a
typical installation using FOH (Front-of-House) and monitor consoles all
connections are made to the rear of the unit.
Typically Outputs 3 & 4 could be used for Outside Broadcast trucks and mobile
recording studios. Connections are made quick and easy by using standard
XLR connectors throughout.
A LINK switch is provided which connects the Input of each channel directly to
it's associated Output 1. This arrangement allows the original microphone
signal to feed the FOH desk whilst providing 3 split outputs.
By using the internal jumpers the MS424 can be configured as a 2 input 8
output, 1 input 12 output or 1 input 16 output splitter for a variety of
applications including multiple press feeds.