LaCie d2 Professional User Manual Model: Click here to access an up-to-date online version of this document. You will also find the most recent content as well as expandable illustrations, easier navigation, and search capability.
Cont ent s 1 Introduction ....................................................................................4 ....... . . . . content Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4. . . . . . . . . . . . . . . um Minim . . . .system . . . . . . requirem . . . . . . . . ents . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . .w Ho . . to . . .cho . . . o. se . . . the . . . file . . . .system . . . . . . fo . . rmat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 .......... . . . . . . . Optim Toolkit . . . . . .ize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduc on LaCie d2 Professional is ideal for professional editors, photographers and graphic artists who work with bandwidth-intensive content such as 4K video and 3D graphics. For updated technical information about your device, visit www.lacie.com/support/d2-pro. Box content LaCie d2 Professional USB-C (USB 3.1 Gen 2) cable USB-C to USB 3.0/USB 2.0 adapter cable (compatible with Type A ports) External power supply Quick Install Guide Important—Save your packaging.
1. 2. 3. 4. 5. Multi-function status LED / power button Vibration-dampening rubber feet USB 3.1 Gen 2 port Power supply connection Kensington® lock slot Technical specifica ons Enclosure dimensions Side Dimensions (mm / in) Width 60 / 2.36 Height 30 / 5.12 Length 195 / 7.68 Weight Capacity Weight (kg / lbs) 4TB 1.3 / 2.87 6TB 1.3 / 2.87 10TB 1.3 / 2.
Electrical Power supply 100-240V 50-60 Hz 18W Power supply barrel dimensions (mm) Inner diameter 2.5 Outer diameter 5.5 Length 11.5 Use only the power supply provided with your LaCie d2 Professional. Power supplies from third-party devices and other LaCie products can damage your d2 Professional. Posi on and stacking Always make certain to place your LaCie d2 Professional on a flat, even surface that can support the heat output and airflow of a professional hard drive enclosure.
System LEDs LaCie d2 Professional features a multi-functional LED and power button on the front of the enclosure. Power bu on Power on In most instances, d2 Professional powers on automatically when connected to a computer and an active power source. However, the LED button can be used to power on the device if the following two conditions are met: The device was powered off using a long press. The device remains connected to the computer’s USB port and an active power source.
To power on the device, push the LED button for one second. Power off Follow the steps below to turn the device off: 1. Make certain that d2 Professional’s volumes are not being accessed. 2. Eject the volumes. See Safely Remove LaCie d2 Professional From Your Computer for instructions. Once the volumes have been properly ejected, the device enters power-saving mode. 3. Apply a long press (minimum four seconds) to the LED button. The LED turns solid blue before turning off.
Entering power-saving mode Exiting power-saving mode The host computer placed the product into power-saving mode due to inactivity. Access d2 Professional’s volume on the host computer. For example, copy files to its volume. The computer is in sleep mode. Wake up the computer. LED status The LED helps you identify the general status of your d2 Professional. LED State Off The device is turned off.
Use only the power supply provided with your LaCie d2 Professional. Power supplies from third-party devices and other LaCie products can damage your d2 Professional.
Cables and Connectors USB-C protocols USB is a serial input/output technology for connecting peripheral devices to a computer. USB-C is the latest implementation of this standard and it provides higher bandwidth and new power management features. USB-C supports many protocols: Thunderbolt 3 Transfer rates up to 40Gb/s USB 3.1 Gen 2 Transfer rates up to 10Gb/s USB 3.1 Gen 1 Transfer rates up to 5Gb/s SuperSpeed USB 3.0 Transfer rates up to 5Gb/s Hi-Speed USB 2.
d2 Professional Computer USB-C to USB Type A cable Use the USB-C to USB Type A cable to connect d2 Professional to a Type A (USB 3.0 or USB 2.0) port on your computer. d2 Professional Computer Transfer rates with USB Type A connections have the potential to reach the following speeds: SuperSpeed USB 3.0 Transfer rates up to 5Gb/s Hi-Speed USB 2.
Ge ng Connected STEP 1 – Connect the USB cable Confirm the type of USB port on your computer, and then choose the appropriate cable to connect LaCie d2 Professional. USB-C to USB-C For optimal transfer rates, use the USB-C to USB-C cable to connect d2 Professional to a USB-C (USB 3.1 or Thunderbolt 3) port on your computer. USB-C to USB Type A Use the USB-C to USB Type A cable to connect d2 Professional to a computer’s Type A port (USB 3.0 or USB 2.0).
STEP 2 - Prepare and connect the power supply LaCie d2 Professional will power on automatically when it is connected to a computer that is turned on and a live power outlet. Use only the power supply provided with your d2 Professional. Power supplies from third-party devices and other LaCie products can damage your d2 Professional. 1. Press the release tab on the universal power supply to unlock the safety cover. Slide the cover back to remove it. 2.
3. Connect the power cable to the power input on d2 Professional, and then connect the power supply to a live power outlet.
The setup process lets you: Register your device Get the most from your device with easy access to information and support. Install Toolkit Manage backup plans, mirror folders, and more. 1. Using a file manager such as File Explorer or Finder, open LaCie d2 Professional and launch Start Here Win or Start Here Mac. 2. Follow the onscreen instructions. Your computer must be connected to the internet to install Toolkit.
Disconnec ng the hard drive In order to avoid file system corruption, it’s important to unmount your hard drive’s volumes before disconnecting the interface cable. See Safely Remove LaCie d2 Professional From Your Computer for details.
Op onal Forma ng and Par oning LaCie d2 Professional is delivered formatted in exFAT for compatibility with both Windows and Mac computers. If you use the drive with only one type of computer, you can optimize file copy performance by formatting the drive in the native file system for your operating system—NTFS for Windows or HFS+ for Macs. There are two ways you can optimize performance: Toolkit Optimize—Format your drive for optimal performance with just a few simple clicks.
…you connect the storage device to Windows computers, and you don’t need to allow a Mac to write to the disk. Use HFS+ if: …you connect the storage device to Mac computers, and you don’t need to allow a Windows computer to read or write to the disk. Use exFAT if: …you need to allow both Mac and Windows computers to read and write to the disk. You can use FAT32 if: …you connect the storage device to older Windows and Mac computers. FAT32 is not recommended for modern operating systems and computers.
5. Click Optimize. 6. A notice appears asking you to confirm the format operation. Click Format. Manual forma ng Use the steps below to manually format and partition a storage device. Formatting erases everything on the storage device. LaCie highly recommends that you back up all data on your storage device before performing the steps below. LaCie is not responsible for any data lost due to formatting, partitioning, or using a LaCie storage device. Mac macOS version 10.11 and later 1.
6. For Scheme, select GUID Partition Map. 7. Click Erase. 8. Disk Utility formats the drive. When it’s finished, click Done. Windows 1. Make sure the storage device is connected to and mounted on the computer. 2. Go to Search and then type diskmgmt.msc. In the search results, double-click Disk Management. 3. From the list of storage devices in the middle of the Disk Management window, locate your LaCie device. 4. The partition must be available to format.
Safely Remove LaCie d2 Professional From Your Computer Always eject a storage drive from your computer before physically disconnecting it. Your computer must perform filing and housekeeping operations on the drive before it is removed. Therefore, if you unplug the drive without using the operating system’s software, your files can become corrupt or damaged. Mac There are several ways you can eject your hard drive from a Mac. See below for two options. Eject via Finder window 1. Open a Finder window. 2.
Windows 8 / Windows 10 2. If you don't see the Safely Remove Hardware icon, click the Show hidden icons arrow in the system tray to display all icons in the notification area. 3. In the list of devices, choose the device you want to eject. Windows displays a notification when it is safe to remove the device. 4. Disconnect the hard drive from the computer.
Frequently Asked Ques ons For help setting up and using your LaCie hard drive, review the frequently asked questions below. For additional support resources, go to www.lacie.com/support/d2-pro.
LaCie d2 Pro fessio nal 1/28/19 25
Regulatory Compliance FCC Declara on of Conformance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Class A Informa on This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
接口电缆 (如果提供) Interface cable (if provided) X O O O O O 其他外壳组件 Other enclosure components O O O O O O 本表格依据 SJ/T 11364 的规定编制。 This table is prepared in accordance with the provisions of SJ/T 11364-2014 O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。 O: Indicates that the hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T26572.
Unit 鉛 (Pb) 汞 (Hg) 鎘 (Cd) 六價鉻 (Cr+6) 多溴聯苯 (PBB) 多溴二苯醚 (PBDE) 硬盘驱动器 HDD — O O O O O 外接硬盤印刷電路 板 Bridge PCBA — O O O O O 電源 (如果提供) Power Supply (if provided) — O O O O O 接口電纜 (如果提供) Interface cable (if provided) — O O O O O 其他外殼組件 Other enclosure components O O O O O O 備考 1. "O" 係指該项限用物質之百分比含量未超出百分比含量基準值。 Note 1. "O" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 備考 2.
Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Note Importante pour l'u lisa on de disposi fs mobiles Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣ LaCieΔΗΛΩΝΕΙ direct attached storage device ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 2004/5/ΕΚ. Français [French] Par la présente LaCie déclare que l'appareil direct attached storage device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2004/5/CE.
Note: To protect your data, always follow the safe removal procedures for your operating system when disconnecting your product.