SDS

water to cover. Consult local state and federal hazardous regulation before disposing into
approved hazardous waste landfills. Obey relevant law.
7. HANDLING AND STORAGE
Precaution For Safe Handling: Avoid contact with skin, eyes and clothing. Avoid breathing
vapors, spray mist or sanding dust. In case of insufficient ventilation, wear suitable respiratory
equipment.
Conditions For Safe Storage, Including Incompatibilities: Handle containers carefully to
prevent damage and spillage. Incompatible materials: Alkaline materials, strong acid and
oxidizing materials.
Store in original containers at temperatures between 5 ºC and 25 ºC. Keep away from heat,
sparks and open flame. Protect from freezing and direct sunlight. Keep containers tightly closed.
Ensure that waste and contaminated materials are collected and removed from the work area as
soon as possible in a suitably labeled container.
8. EXPOSURE CONTROLS\PERSONAL PROTECTION
Exposure Limits
Components
CAS Limits
Polyvinyl Alcohol 25213-24-5 OSHA PEL 15mg/m3, ACGIH
TLV 10mg/m3
Engineering Controls: Use appropriate engineering control such as process enclosures,
local exhaust ventilation, or other engineering controls to control airborne levels below
recommended exposure limits. Good general ventilation should be sufficient to
control airborne levels. Where such system are not effective wear suitable
personal protective equipment, which performs satisfactorily and meet OSHA
or other recognized standards. Consult with local procedures for selection,
training, inspection and maintenance of the personal protective equipment.
Personal Protective Equipment:
Respiratory Protection: In case of insufficient ventilation wear suitable respiratory equipment.
Eyes Protection: Safety glasses with side-shields.
Skin Protection: Chemical -resistance gloves and chemical goggles, face-shield and
synthetic apron or coveralls should deb used to prevent contact with eyes, skin or clothing.