Network Router User Manual

LANCOM 3550 Wireless
 Chapter 6: Point- to- point connections
54
EN
connection, WLAN-2 if you are using the second card, e.g. as with an access
point with two WLAN modules).
 Activate the 802.11i encryption.
 Select the method '802.11i (WPA)-PSK'.
 Enter the passphrase to be used.

The passphrases should consist of a random string at least 22 charac-
ters long, corresponding to a cryptographic strength of 128 bits.
When set as P2P Master, the passphrase entered here will be used to check
the Slave's authorization to access. When set as P2P Slave, the access point
transfers this information to register with the remote site.
Configuration with
LANconfig
For configuration with LANconfig you will find the encryption settings under
the configuration area 'WLAN Security' on the '802.11i/WEP' tab.
Master
Slave
Slave
Master
Slave
Slave